Element-tracing of mineral matters in Dendrobium officinale using ICP-MS and multivariate analysis

Rare studies have been performed to trace the mineral elements in Dendrobium officinale. In this study, we aim to trace the mineral elements in D. officinale collected from ten geographical locations in China. ICP-MS system was used for simultaneous determination of mineral elements. Principal component analysis was performed using the obtained data in the quantification of mineral contents. Cluster analysis was performed using the Ward’s method. Several of essential microelments were detected in D. officinale, including ferrum (Fe), manganese (Mn), zinc (Zn), chromium (Cr), nickel (Ni) and vanadium (V). Among these elements, three elements (i.e. Fe, Mn and Zn) were highly and simultaneously detected in the D. officinale collected from the ten locations. The level of Ni was positively associated with that of Zn (r = 0.986, P < 0.01). The level of titanium (Ti) was positively associated with that of V (r = 0.669, P < 0.05), and negatively associated with Cr (r = −0.710, P < 0.05). In addition, the level of Mn was positively associated with that of barium (r = 0.749, P < 0.05). Further, the level of Fe was positively associated with that of Ni (r = 0.664, P < 0.05), Zn (r = 0.742, P < 0.05), and rare earth elements (r = 0.847, P < 0.01), respectively. Three eigenvalues explained about 86.60 % of the total variance, which contributed significantly to the explanation of cumulative variance. Cluster analysis indicated the cultivars were categorized into 3 clusters. Ni, Zn, Fe, Cr, Ti and rare earth elements were designated as the characteristic elements. Cultivars collected from Yulin, Menghai, and Shaoguan ranked the top 3 in the comprehensive scores, indicating the content of the mineral elements was comparatively higher in these locations.

elements which have been considered to be closely associated with the pharmaceutical features of D. officinale (Ding et al. 2009). Nevertheless, rare studies have been performed to trace the mineral elements in D. officinale.
Element-tracing is very important in the formation or preparation of active chemical constituents present in food and nutrition product (Yamashita et al. 2005;Maiga et al. 2005). The chemical constituents are partially associated with the medicinal and nutritional properties of the herbs (Nookabkaew et al. 2006). In this study, elements-tracing was performed in D. officinale cultivars collected from ten different locations in China. The potential correlation between the traced elements was investigated, and principal component analysis (PCA) was performed to evaluate the correlation matrix. Further, clustering analysis was performed to investigate the geographical features of the cultivars. Our study could contribute to the quality control of main components in D. officinale.

Sample preparation
Sample preparation was performed as previously described by Tokalıoğlu (2012). Briefly, the cultivars were washed with tap water thoroughly, followed by distilled water. At least three cultivars obtained from each location were used for the sample preparation. After drying at 105 °C, the D. officinale was grounded into powder using a mortar and sieved using a 60-grid sifter. Then the powder (0.20 g) was added to a conical flask containing 10 mL nitric acid and perchloric acid mixture (nitric acid/perchloric acid = 5:1). Subsequently, the mixture was heated to 150 °C using a hot plate until complete mineralized. Afterwards, the temperature was modulated to 200 °C. Upon complete digestion, the flask was obtained and washed using demineralized water. Finally, the mixture was transferred to a 10 mL color comparison tube for further analysis.

Statistical analysis
Data were presented as mean ± standard deviation. PCA was performed using the obtained data in the quantification of mineral contents. SPSS 19.0 software was used for the data analysis. P < 0.05 indicated statistical difference.

Concentration of elements in D. officinale
The accuracy of the method was tested by analyzing of certified reference material (GBW10052). Table 1 summarized the concentration of mineral elements in D. officinale cultivars. Several of essential microelments were detected in D. officinale, including Fe, Mn, Zn, Cr, Ni and V. Among these elements, three elements (i.e. Fe, Mn and Zn) were highly and simultaneously detected in the D. officinale collected from the ten locations. The highest content of Fe, Mn and Zn was determined in the cultivars collected from Yulin (Fe: 779 ± 24 μg g −1 ), Shaoguan (Mn: 884 ± 23 μg g −1 ) and Yulin (Zn: 366 ± 24 μg g −1 ), respectively.
The content of REEs was also detected in the plants, and the content of REE was less than 1 μg g −1 ( Table 1). The cultivars collected from Xingyi showed the highest REE content, while the lowest REE was revealed in the cultivars collected from Simao.

Correlation between the content of mineral elements
In this study, we evaluated the metal to metal correlation. As revealed in Fig. 1, the level of Ni was positively associated with that of Zn (r = 0.986, P < 0.01). The level of Ti was positively associated with that of V (r = 0.669, P < 0.05), and negatively associated with Cr (r = −0.710, P < 0.05). In addition, the level of Mn was positively associated with that of Ba (r = 0.749, P < 0.05). Further, the level of Fe was positively associated with that of Ni (r = 0.664, P < 0.05), Zn (r = 0.742, P < 0.05), and REEs (r = 0.847, P < 0.01), respectively.

PCA of mineral elements
PCA was performed to evaluate the correlation matrix using SPSS 19.0 software. The data set was autoscaled. The results indicated that three eigenvalues (PC1-3) explained about 86.60 % of the total variance, which contributed significantly to the explanation of cumulative variance. Therefore, the first three eigenvalues were selected for further analysis. The first factor has high loadings for Ni and Zn, and explained about 46.28 % of the variance. The second factor has high loadings for Fe and REEs, and explained about 69.86 % of the variance. Meanwhile, the third factor has high loadings for Cr and Ti, and

Table 1 Mineral contents in the D. officinale collected from 10 geographical locations in China
The concentration is a sum of elements. REE included: scandium, yttrium, lanthanum, cerium, praseodymium, neodymium, samarium, europium, gadolinium, terbium, dysprosium, holmium, erbium, thulium, ytterbium and lutetium REE rare earth element Location Ti (μg g Xingyi  (Table 2). A three-dimensional plot of the PC loading was displayed in Fig. 1, and the relationship among the heavy metals could be observed clearly.

Cluster analysis
In our study, cluster analysis was performed using the Ward's method, which revealed the cultivars were mainly classified into three clusters: (1) cultivars collected from Simao, Yuxi, Wenshan, Honghe, and Dehong; (2) cultivars collected from Xingyi and Xinanjiang; and (3) cultivars collected from Shaoguan, Yulin and Menghai. In each cluster, the cultivars showed similarities on the quantification of mineral elements, demonstrating the quantification of D. officinale was associated with geographic locations (Fig. 3).

Discussions
Increasing evidence reveals that certain elements of D. officinale, a Chinese herbal plant, could enhance the immune functions and inhibit the cell apoptosis Liu et al. 2011). Recently, D. officinale has been commonly applied in the research and development of healthcare products in China, and the content of the mineral elements and microelements is crucial for the quality control of the commercial products. In this study, we traced the elements in the cultivars in different geographical locations. Extensive studies indicates that mineral elements and microelements are crucial for the health and disease prevention (Deng et al. 2009;Grace et al. 1999). For example, metal microelements, including Zn, Cu, Ag and Au, have been reported to involve in the main biochemical parameters such as ATP-ase activity, transmembrane potential and respiratory activity (Rieznichenko et al. 2008). Additionally, low zinc in diet was associated with decrease in resting metabolic rate (Wada and King 1986). Further, iron played

Fig. 2 Q values of the cultivars in different locations
important roles in the regulation of body temperature and energy production in order to response to the reduced environmental temperature (White-Ziegler et al. 2007).
In the present study, several mineral elements (i.e. Fe, Mn, Zn, Cr, Ni, V, Ti, Ba and REEs) were simultaneously detected in the D. officinale collected from 10 geographical locations in China using ICP-MS. According to the quantification analysis, the content of the mineral elements varied in the D. officinale collected from different locations. Three elements (i.e. Fe, Mn, and Zn) were simultaneously detected with high content in these cultivars. For the biological properties of these elements, four elements (i.e. Fe, Mn, Zn, and Ni) have been reported with anti-tumor activity (Bernhardt et al. 2009). Fe has been considered to be essential for the hematopoiesis in human bodies (Li et al. 2011;Morikawa et al. 1995). In addition, Zn and Mn are closely associated with the immune function in vivo (Huskisson et al. 2007;Gajula et al. 2011). Further, Cr is crucial for the maintenance of blood sugar and lipid metabolism (Dogukan et al. 2009). In this study, we also evaluated the correlation among the mineral elements that were simultaneously detected. The results revealed that the quantification of Ni was positively correlated with that of Zn. Meanwhile, a positive correlation was noticed in Ti and V, Mn and Ba, Fe and Ni, as well as Fe and Zn, respectively.
PCA, describing the relationship of multi-dimensional data between variables and objects, has been commonly used for the evaluation of distributing features of mineral elements and microelements (Ringner 2008;Joliffe and Morgan 1992). In this study, three eigenvalues explained about 86.60 % of the total variance were obtained, among which Ni and Zn were highly loaded in the first eigenvalue, Fe and REE were highly loaded in the second eigenvalue, and Ti and Cr were highly loaded in the third eigenvalue, respectively. Therefore, we concluded that these elements could be considered as the representative elements of D. officinale, and the top 3 cultivars with the most content of mineral elements were those obtained from Yulin, Menghai, and Shaoguan.