TY - JOUR AU - Amarnath, M. V. AU - Pratihar, D. K. PY - 2009 DA - 2009// TI - Forward and reverse mappings of the tungsten inert gas welding process using radial basis function neural networks JO - Proc Inst Mech Eng Part B: J Eng Manuf VL - 223 UR - https://doi.org/10.1243/09544054JEM1278 DO - 10.1243/09544054JEM1278 ID - Amarnath2009 ER - TY - JOUR AU - Chandrashekarappa, M. P. G. AU - Krishna, P. AU - Parappagoudar, M. B. PY - 2014 DA - 2014// TI - Forward and reverse process models for the squeeze casting process using neural network based approaches JO - Appl Comput Intell Soft Comput VL - 2014 ID - Chandrashekarappa2014 ER - TY - JOUR AU - Chen, W. C. AU - Fu, G. L. AU - Tai, P. H. AU - Deng, W. J. PY - 2009 DA - 2009// TI - Process parameter optimization for MIMO plastic injection molding via soft computing JO - Expert Syst Appl VL - 36 UR - https://doi.org/10.1016/j.eswa.2007.10.020 DO - 10.1016/j.eswa.2007.10.020 ID - Chen2009 ER - TY - JOUR AU - Cook, D. F. AU - Ragsdale, C. T. AU - Major, R. L. PY - 2000 DA - 2000// TI - Combining a neural network with a genetic algorithm for process parameter optimization JO - Eng Appl Artif Intell VL - 13 UR - https://doi.org/10.1016/S0952-1976(00)00021-X DO - 10.1016/S0952-1976(00)00021-X ID - Cook2000 ER - TY - JOUR AU - Cus, F. AU - Milfelner, M. AU - Balic, J. PY - 2006 DA - 2006// TI - An intelligent system for monitoring and optimization of ball-end milling process JO - J Mater Process Technol VL - 175 UR - https://doi.org/10.1016/j.jmatprotec.2005.04.041 DO - 10.1016/j.jmatprotec.2005.04.041 ID - Cus2006 ER - TY - JOUR AU - Fard, R. K. AU - Afza, R. A. AU - Teimouri, R. PY - 2013 DA - 2013// TI - Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite JO - J Manuf Process VL - 15 UR - https://doi.org/10.1016/j.jmapro.2013.09.002 DO - 10.1016/j.jmapro.2013.09.002 ID - Fard2013 ER - TY - JOUR AU - Katherasan, D. AU - Elias, J. V. AU - Sathiya, P. AU - Haq, A. N. PY - 2014 DA - 2014// TI - Simulation and parameter optimization of flux cored arc welding using artificial neural network and particle swarm optimization algorithm JO - J Intell Manuf VL - 25 UR - https://doi.org/10.1007/s10845-012-0675-0 DO - 10.1007/s10845-012-0675-0 ID - Katherasan2014 ER - TY - JOUR AU - Kittur, J. K. AU - Parappagoudar, M. B. PY - 2012 DA - 2012// TI - Forward and reverse mappings in die casting process by neural network-based approaches JO - J Manuf Sci Prod VL - 12 ID - Kittur2012 ER - TY - STD TI - Lee SW, Nam SH, Choi HJ, Kang EG, Ryu KY (2007) Optimized machining condition selection for high-quality surface in high-speed finish milling of molds. In: Key Engineering Materials vol 329, pp 711–718 ID - ref9 ER - TY - JOUR AU - Maji, K. AU - Pratihar, D. K. PY - 2010 DA - 2010// TI - Forward and reverse mappings of electrical discharge machining process using adaptive network-based fuzzy inference system JO - Expert Syst Appl VL - 37 UR - https://doi.org/10.1016/j.eswa.2010.05.019 DO - 10.1016/j.eswa.2010.05.019 ID - Maji2010 ER - TY - JOUR AU - Malakooti, B. AU - Raman, V. PY - 2000 DA - 2000// TI - An interactive multi-objective artificial neural network approach for machine setup optimization JO - J Intell Manuf VL - 11 UR - https://doi.org/10.1023/A:1008999907768 DO - 10.1023/A:1008999907768 ID - Malakooti2000 ER - TY - JOUR AU - Panda, M. C. AU - Yadava, V. PY - 2012 DA - 2012// TI - Intelligent modeling and multiobjective optimization of die sinking electrochemical spark machining process JO - Mater Manuf Process VL - 27 UR - https://doi.org/10.1080/10426914.2010.544812 DO - 10.1080/10426914.2010.544812 ID - Panda2012 ER - TY - JOUR AU - Parappagoudar, M. B. AU - Pratihar, D. K. AU - Datta, G. L. PY - 2008 DA - 2008// TI - Forward and reverse mappings in green sand mould system using neural networks JO - Appl Soft Comput VL - 8 UR - https://doi.org/10.1016/j.asoc.2007.01.005 DO - 10.1016/j.asoc.2007.01.005 ID - Parappagoudar2008 ER - TY - JOUR AU - Parappagoudar, M. B. AU - Pratihar, D. K. AU - Datta, G. L. PY - 2008 DA - 2008// TI - Neural network-based approaches for forward and reverse mappings of sodium silicate-bonded, carbon dioxide gas hardened moulding sand system JO - Mater Manuf Processes VL - 24 UR - https://doi.org/10.1080/10426910802543681 DO - 10.1080/10426910802543681 ID - Parappagoudar2008 ER - TY - JOUR AU - Pawar, P. J. AU - Rao, R. V. PY - 2013 DA - 2013// TI - Parameter optimization of machining processes using teaching–learning-based optimization algorithm JO - Int J Adv Manuf Techn VL - 67 UR - https://doi.org/10.1007/s00170-012-4524-2 DO - 10.1007/s00170-012-4524-2 ID - Pawar2013 ER - TY - JOUR AU - Raja, S. B. AU - Baskar, N. PY - 2012 DA - 2012// TI - Application of particle swarm optimization technique for achieving desired milled surface roughness in minimum machining time JO - Expert Syst Appl VL - 39 UR - https://doi.org/10.1016/j.eswa.2011.11.110 DO - 10.1016/j.eswa.2011.11.110 ID - Raja2012 ER - TY - JOUR AU - Raja, S. B. AU - Pramod, C. S. AU - Krishna, K. V. AU - Ragunathan, A. AU - Vinesh, S. PY - 2015 DA - 2015// TI - Optimization of electrical discharge machining parameters on hardened die steel using Firefly Algorithm JO - Eng Comput VL - 31 UR - https://doi.org/10.1007/s00366-013-0320-3 DO - 10.1007/s00366-013-0320-3 ID - Raja2015 ER - TY - JOUR AU - Rao, R. V. AU - Pawar, P. J. PY - 2009 DA - 2009// TI - Modelling and optimization of process parameters of wire electrical discharge machining JO - Proc Inst Mech Eng Part B: J Eng Manuf VL - 223 UR - https://doi.org/10.1243/09544054JEM1559 DO - 10.1243/09544054JEM1559 ID - Rao2009 ER - TY - JOUR AU - Senthilkumaar, J. S. AU - Selvarani, P. AU - Arunachalam, R. M. PY - 2012 DA - 2012// TI - Intelligent optimization and selection of machining parameters in finish turning and facing of Inconel 718 JO - Int J Adv Manuf Technol VL - 58 UR - https://doi.org/10.1007/s00170-011-3455-7 DO - 10.1007/s00170-011-3455-7 ID - Senthilkumaar2012 ER - TY - JOUR AU - Specht, D. F. PY - 1991 DA - 1991// TI - A general regression neural network JO - IEEE Trans Neural Netw VL - 2 UR - https://doi.org/10.1109/72.97934 DO - 10.1109/72.97934 ID - Specht1991 ER - TY - JOUR AU - Teimouri, R. AU - Baseri, H. PY - 2015 DA - 2015// TI - Forward and backward predictions of the friction stir welding parameters using fuzzy-artificial bee colony-imperialist competitive algorithm systems JO - J Intell Manuf VL - 26 UR - https://doi.org/10.1007/s10845-013-0784-4 DO - 10.1007/s10845-013-0784-4 ID - Teimouri2015 ER - TY - JOUR AU - Teixidor, D. AU - Ferrer, I. AU - Ciurana, J. AU - Özel, T. PY - 2013 DA - 2013// TI - Optimization of process parameters for pulsed laser milling of micro-channels on AISI H13 tool steel JO - Robotics Comput Integrated Manuf VL - 29 UR - https://doi.org/10.1016/j.rcim.2012.05.005 DO - 10.1016/j.rcim.2012.05.005 ID - Teixidor2013 ER - TY - JOUR AU - Yildiz, A. R. PY - 2013 DA - 2013// TI - Optimization of cutting parameters in multi-pass turning using artificial bee colony-based approach JO - Inf Sci VL - 220 UR - https://doi.org/10.1016/j.ins.2012.07.012 DO - 10.1016/j.ins.2012.07.012 ID - Yildiz2013 ER - TY - JOUR AU - Yusup, N. AU - Sarkheyli, A. AU - Zain, A. M. AU - Hashim, S. Z. M. AU - Ithnin, N. PY - 2014 DA - 2014// TI - Estimation of optimal machining control parameters using artificial bee colony JO - J Intell Manuf VL - 25 UR - https://doi.org/10.1007/s10845-013-0753-y DO - 10.1007/s10845-013-0753-y ID - Yusup2014 ER -