Table 6 F statistics table
From: Parameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method
Factor | Speed | Depth of cut | Feed |
|---|---|---|---|
F value calculated | 32.49 | 12.83 | 1.77 |
F value from table, F0.1(2,2) | 9.00 | 9.00 | 9.00 |
From: Parameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method
Factor | Speed | Depth of cut | Feed |
|---|---|---|---|
F value calculated | 32.49 | 12.83 | 1.77 |
F value from table, F0.1(2,2) | 9.00 | 9.00 | 9.00 |