Skip to main content
SpringerPlus
Download PDF

Psychrotrophic Pseudomonas mandelii CBS-1 produces high levels of poly-β-hydroxybutyrate

SpringerPlus volume 2, Article number: 335 (2013) Cite this article

Abstract

A novel facultative psychrotroph (strain CBS-1), which accumulates poly-β-hydroxybutyrate (PHB), was isolated from soil samples taken from Changbai Mountain, China. Phylogenetic analysis based on 16S rRNA sequence data and Biolog analysis identified strain CBS-1 as Pseudomonas mandelii. Transmission electron micrographs revealed abundant electron-transparent intracellular granules. 1H-nuclear magnetic resonance analysis revealed that the granules were composed of PHB. P. mandelii CBS-1 grew optimally at 20°C. When cultured aerobically for 48 h with sucrose as the sole carbon source, strain CBS-1 yielded a maximum cell density of 29.3 g/L cell dry weight and synthesized 22.3 g/L of PHB. The ability of strain CBS-1 to grow at a low temperature and rapidly synthesize high levels of PHB may reduce the costs of industrial PHB production.

Background

Polyhydroxyalkanoates (PHAs) are biodegradable polyesters composed of (R)-3HA monomers, which are ubiquitously synthesized by microorganisms. Many bacteria store carbon as PHAs to protect themselves from nutrient limitation, including lack of nitrogen, phosphorus, and magnesium (Dowes and Senior, 1973). PHAs are synthesized by most genera of Bacteria and (Archaea Steinuchel and Byrom, 1991). The best-characterized microorganisms that produce PHAs are Alcaligenes sp. (Linko et al., 1993 sp. Azotobacter (Page,1992), Bacillus sp. (Huang and Reusch, 1996), Rhodopseudomonas sp. (Yue et al., 2007), and Pseudomonas sp. (Kimura et al., 1992).

Poly-β-hydroxybutyrate (PHB), the least complex PHA biopolyester, offers distinct advantages for polyester production because of its biodegradability, lighter mass, thermoplasticity, and resistance to abrasion (Steinbuchel and Valeniin, 1995). PHB shows great potential for manufacturing products such as degradable plastics, medical implant materials, and fine chemicals (Holemes, 1985). Unfortunately, available bacterial strains synthesize low levels of PHB even after prolonged fermentation. Therefore, PHB biosynthesis is more expensive than standard chemical synthesis and limits its use (Choi and Lee, 1999).

Therefore, the goal of our research was to isolate bacteria capable of producing high levels of PHB at low temperatures. We report here the isolation of a facultative psychrotrophic strain (CBS-1) from the soil of Changbai Mountain, China, and its identification as Pseudomonas mandelii. It is the first report of PHB accumulation in P. mandelii. Strain CBS-1 grew aerobically to a dry-cell weight of 29.3 g/L and synthesized 22.3 g/L of PHB in 48 h, which is higher compared with other reported strains (Kimura et al., 1992; Huang and Reusch, 1996; Yue et al., 2007).

Material and methods

Strains, growth media, and culture condition

A soil sample from Changbai Mountain (altitude 2183 m, N 42°08′19.7″, E 128°10′8.3″), Jilin Province, China, was suspended in sterile H2O, vortexed thoroughly, and cultured in an enriched medium containing 5 g/L yeast extract, 10 g/L tryptone, and 2.5 g/L NaCl at 20°C for 2 days. A 50-μL aliquot was spread on PHB detection agar (20 g/L glucose, 2 g/L (NH4)2SO4, 13.3 g/L KH2PO4, 1.2 g/L MgSO4 .7H2O, 1.7 g/L citric acid, 1.7 g/L trace elements solution, 15 g/L agar, and 0.5 μg/mL Nile blue A (Spiekermann et al., 1999). After overnight incubation at 20°C, plates were observed under ultraviolet (UV) light. Fluorescent colonies were purified by streaking on the same agar plates, and the isolates were further characterized by staining with Sudan Black B (Lee and Choi, 2004).

Morphological characteristics

Cell morphology was examined using transmission electron microscopy as follows: a 2-mL aliquot of cells in late exponential phase (optical density OD600 55–80) was fixed with 4% glutaraldehyde and 1% osmium tetroxide and dehydrated by sequential treatment with 30%, 50%, 70%, 80%, 90%, and 100% acetone. The dehydrated cells were immersed in epoxy resin and then transferred into sample boats. The resin was polymerized for 24 h at 30, 45, and 60°C. Ultra-thin sections were prepared using an ultramicrotome, stained sequentially with uranyl acetate and lead citrate for 22 min and 5 min, respectively, and observed using an H-7650 transmission electron microscope (Hitachi, Tokyo, Japan).

Biolog Gram-negative (GN) assay

Gram staining was performed as described by Magee et al. (1975). A pure culture was grown on a BUG agar plate (Biolog Catalog #70101). Biolog™ GN 96-well microtiter plates contain 95 different carbon sources, a negative control, and a tetrazolium dye (Biolog Inc., Hayward, CA, USA). Cells were swabbed from the surface of the plate and suspended to a specific density in GN Inoculating Fluid (Biolog Catalog #72101). The well of the Biolog GN2 MicroPlate (Biolog Catalog #1011) was inoculated individually with 150 μL of diluted suspensions and then incubated at 30°C for 24 h (Garland and Mills, 1991). The MicroPlate was inspected either visually or analyzed using the Biolog MicroStation™ and the results compared with the GN III Database according to the manufacturer’s instructions (Biolog Catalog #22730D).

Polymerase chain reaction (PCR) amplification of the 16S rRNA gene

The 16S rRNA gene was amplified using PCR with the universal bacterial primers 27F (5′-agagttgatcctggctcag-3′) and 1492R (5′-ggytaccttgttacgactt-3′) (Lane, 1991), and the product was sequenced by Takara Corp. (Dalian, China). The sequence was compared with 16S rRNA gene sequences in the GenBank database (http://www.ncbi.nlm.nih.gov) using the BLAST algorithm (Altschul et al., 1990). A neighbor-joining tree was constructed using the MEGA 4.0 program (Kumar et al., 2004).

Poly-β-hydroxybutyrate extraction

Cells were harvested and treated with 10% sodium dodecyl sulfate at 100°C for 15 min. After centrifugation at 10,000 rpm for 20 min, the pellets were washed twice with H2O, dried at 40°C, and extracted with chloroform for 1 h at 60°C. Insoluble material was removed by filtration, and the soluble PHB was separated from the chloroform phase by evaporation, washed twice with methanol, filtered, dried at 60–70°C, and weighed using an electronic balance (Sartorius, BSA224S).

Nuclear magnetic resonance (NMR) spectroscopy

The NMR spectra of 1-mL samples were recorded using a BRUAK AV-400 spectrometer with a 5-mm 1H-probe, and deuterated chloroform (CDCl3) was used as a solvent at a final concentration of 10 g/L. The 1H-NMR spectrum for PHB was recorded at 400 MHz. A PHB standard was purchased from Sigma-Aldrich (St. Louis, MO, USA, #MSDS 363502).

Effect of culture conditions on cell growth

The effects on cell growth of carbon and nitrogen sources, C/N ratio, temperature, initial pH, and NaCl concentration were investigated using single-factor tests (Tang and Luo, 2008). Specifically, yeast extract, glucose, sucrose, fructose, glycerol, and ethanol were used as carbon source. Nitrogen sources included tryptone, peptone, beef extract, monosodium glutamate, urea, and NH4Cl. All media contained 1.0 g/L KH2PO4, 2.5 g/L Na2HPO4, pH 7.0, and cells were cultured at 20°C, 200 rpm. To test the effect of the C/N ratio, sucrose and monosodium glutamate served as the sole carbon and nitrogen sources and were added at the C/N ratios as follows: 1, 5, 10, 15, 20, 25, and 30. Other conditions were the same as those described above. The optimum C/N ratio was used to test the conditions described next. NaCl concentrations were varied from 0–50 g/L (5-g/L intervals), and at initial pH values from 5.0 to 9.0 (0.5 pH unit intervals). Cultures were incubated from 5°C to 40°C (5°C intervals). After 3 days, cells were collected by centrifugation, and the pellets were dried at 70°C to a constant weight.

PHB production by aerated cultures

Cells was cultured at 20°C in medium containing 1.0 g/L KH2PO4, 2.5 g/L Na2HPO4, with optimal 1% (w/v) sucrose as the carbon source and monosodium glutamate as the nitrogen source. The pH was adjusted to 7.0 with 0.5 M NaOH. A 10-mL inoculum from a CBS-1 starter culture (OD600 0.5) was added to a 150-mL minimal medium. The 250-mL flasks were incubated at 20°C for at least 3 days and shaken at 200 rpm. Samples were collected at 8-h intervals from 0–72 h, centrifuged, and dried at 70°C to a constant weight.

Statistical analysis

All results are shown as the average and standard deviation of at least three independent experiments. Student’s t-test, analysis of variance (ANOVA), and Duncan’s multiple range test were used to determine the statistical significance of differences in the nitrite-to-nitrogen conversion rate. Statistical significance was defined as P < 0.05. All analyses were performed using SPSS for Windows version 11.0.

Results

Isolation and characterization of strain CBS-1

Oxazine dye Nile blue A was used to develop a simple and highly sensitive staining method to directly detect poly-3-hydroxybutyric acid and other PHAs in growing bacterial colonies (Spiekermann et al., 1999). A 50-μl soil sample from Changbai Mountain, Jilin Province, China, was spread on PHB-detection agar containing Nile blue A stain (Lee and Choi, 2004). After incubation and observation under UV light, 59 fluorescent colonies were purified, and 27 were stained by Sudan Black B. A clone isolated from the largest and most intensely stained colony was named strain CBS-1. After incubation for 2 days on LB plates, CBS-1 formed white, circular colonies of semitransparent slabs that were wet with smooth surfaces. The bacilliform cells were GN, 3–4 mm in diameter × 5–7 mm long, and did not form spores. The cells occurred singly or in clusters and contained large granules of PHB (Figure 1).

Figure 1
figure 1

Transmission electron micrograph of a thin section showing dividing P. mandelii CBS-1-containing granules of PHB. Magnification 2,500×.

Full size image

A stretch of 1335 nucleotides of the 16S rRNA gene was PCR amplified and sequenced. The sequence was submitted to GenBank under the accession number KC778401. BLAST analysis indicated that strain CBS-1 is most closely related (99% identity) to P. mandelii. Phylogenetic analysis also grouped CBS-1 together with P. mandelii with 96% bootstrap support (Figure 2).

Figure 2
figure 2

Phylogenetic tree of P. mandelii CBS-1 and other related bacterial genera. Bootstrap values (%) from 1,000 replicates are as shown. The scale bar represents 0.01 nucleotide substitution per position. Numbers in brackets are GenBank accession numbers for the 16S rRNA sequences.

Full size image

The GN III MicroPlate Database (Biolog Catalog #22730D) identifies 564 common species in accordance with classical identification methods and current taxonomic nomenclature. Unfortunately, P. mandelii was not present in the database. The GN MicroPlate performance characteristics indicated that strain CBS-1 was similar to P. fluorescens biovar C. The similarity index was 0.81 at 24 h (Table 1). P. mandelii is classified in the P. fluorescens species (Anzai et al., 2000). Therefore, the Biolog GN assay result did not contradict the 16S rRNA gene sequence, and we concluded that CBS-1 is a P. mandelii strain.

Table 1 Biochemical characteristics of strain CBS-1 and related Pseudomonas species
Full size table

Physiological characteristics of CBS-1

Sucrose and monosodium glutamate were the optimum carbon and nitrogen sources for culturing CBS-1 (Table 2) at a C/N ratio of 5 (Figure 3B). Strain CBS-1 grew to significant numbers between 10 and 35°C, and the optimum growth temperature was 20°C (Figure 3A). Strain CBS-1 grew between pH 6.0 and 9.0 and optimally between pH 7.0 and 7.5 (Figure 3C). Significant growth was observed in media containing 0–3% NaCl (Figure 3D).

Table 2 Effect of different carbon and nitrogen sources on PHB synthesis by strain CBS-1
Full size table
Figure 3
figure 3

Effect of culture conditions on P. mandelii CBS-1 growth. Effects of temperature (A), C/N ratio (B), pH (C), and NaCl concentration (D) were investigated.

Full size image

PHB synthesis by CBS-1

After extracting cells with SDS and isolating PHB as a dried residue as described in Materials and methods, we conducted 1H-NMR analysis (Figure 4). PHB peaks were detected at δ = 5.2, 2.5, and 1.2 ppm, which correspond to a –CH doublet, a –CH2 multiplet, and a –CH3 doublet, respectively (Verlinden et al., 2011; De Rooy et al., 2007). The large peak at δ = 7.3 ppm represents the solvent (CD3Cl), and the peaks at δ = 0.0 ppm and δ = 0.8 ppm represent the internal standard (CH3)4Si. A small peak at δ = 1.6 ppm was attributed to minor contamination of the solvent with H2O. These results were identical to those for the PHB standard. Therefore, we concluded that the only PHA synthesized by strain CBS-1 grown in the presence of sucrose as the carbon source was PHB.

Figure 4
figure 4

1 H-NMR spectra of a PHB standard and the PHB produced by P. mandelii CBS-1.

Full size image

PHB production in aerated CBS-1 cultures

Strain CBS-1 was cultured in 150-mL sucrose-containing medium, pH 7.0, at 20°C in a 250-mL flask, which was shaken as described in Materials and methods. Cells were harvested upon reaching the stationary phase (48 h). The CDW was 29.3 g/L, and the PHB concentration reached 22.3 g/L (Figure 5). The concentrations of PHB were 9 g/L and 13 g/L when the cells were grown at 15°C and 25°C, respectively, under the same conditions. These data indicate that the yields of PHB depend critically on growth temperature.

Figure 5
figure 5

Aerobic growth of P. mandelii CBS-1 and PHB production at 20°C in a medium containing sucrose as carbon source. Each point represents the average of three cultures.

Full size image

Discussion

Because of the efficient and diverse biosynthetic capabilities of psychrotrophs at relatively low temperatures, these organisms provide an important resource for biotechnology (Moyer and Morita, 2007). Soil samples acquired at circumpolar latitudes are rich in psychrotrophs. For example, Jiang et al. (2008) first isolated the P. fluorescens strain A2a5 from Alaskan soil, and the P. extremaustralis sp. nov. strain 14-3T was isolated from an ephemeral pond in Antarctica (Lopez et al., 2009). These two psychrotrophs accumulate large amounts of PHB at a low temperature, strain A2a5 grew at 25°C, while strain 14-3T could grow at a temperature range from 4 to 37°C. The nucleotide sequence of the genome of strain 14-3T has been determined (Tribelli et al., 2012).

Regions of high mountains perennially covered with snow are another abundant source of psychrotrophs. The mean temperature above 2000 m on Changbai Mountain is 3.3°C (Liu 1997). We report here the isolation of a P. mandelii strain designated CBS-1, a facultative psychrotroph, from soil located at an altitude of 2183 m. Species identification was based on sequence analysis of 16S rRNA and the results of the Biolog GN assay. Strain CBS-1 grew to high density (29.3 g/L of CDW at the stationary phase) and robustly produced PHB (76.1% CDW) at 20°C. The yields of PHB produced at 15, 20, and 25°C were significantly different. The yield of PHB produced at 20°C was significantly higher than at 15°C (P < 0.001) and 25°C (P < 0.05).

Compared with a few other Pseudomonas strains that produce PHB at a low temperature, strain CBS-1 is more promising for industrial use. For example, strain CBS-1 uses sucrose as its best carbon source; therefore, PHB can be produced more economically than by strain 14-3T, which requires the more costly carbon source octanoate (Lopez et al., 2009). Moreover, strain CBS-1 grew to a higher maximum cell density than strain 14-3T (Lopez et al., 2009). Jiang et al. (2008) reported that cultivation for 4 days was required to produce the maximum cell density of strain A2a5 and PHB concentration, in contrast to 48 h for strain CBS-1. Therefore, strain CBS-1 may produce higher yields of PHB at a lower cost. Therefore, strain CBS-1 may produce higher yields of PHB at a lower cost and more efficiently than strain 14-3T and A2a5.

Authors’ information

Rongpeng Li and Yuji Jiang co-first author.

References

  1. Altschul SF, Gish W, Miller W, Myers EW, Lipman DJ: Basic local alignment search tool. J Mol Biol 1990, 215: 403-140.

    Article  Google Scholar 

  2. Anzai Y, Kim H, Park JY, Wakabayashi H, Oyaizu H: Phylogenetic affiliation of the Pseudomonads based on 16S rRNA sequence. Int J Sys Evol Microbiol 2000, 50: 1563-1589. 10.1099/00207713-50-4-1563

    Article  Google Scholar 

  3. Choi J, Lee SY: Factors affecting the economics of polyhydroxyalkanoate production by bacterial fermentation. Appl Microbiol Biotechnol 1999, 51: 13-21. 10.1007/s002530051357

    Article  Google Scholar 

  4. De Rooy SL, Wahyuni ET, Wiratni SS, Ismail J: Purification and characterization of poly-hydroxybutyrate (PHB) in Cupriavidus necator . Indo J Chem 2007, 7: 243-248.

    Google Scholar 

  5. Dowes EA, Senior PJ: The role and regulation of energy reserve polymers in microorganisms. Adv Miacrobiol Physiol 1973, 10: 135-266.

    Article  Google Scholar 

  6. Garland JL, Mills L: Classification and characterization of heterotrophic microbial communities on the basis of patterns of community-level sole-carbon-source utilization. App Environ Microbiol 1991, 57: 2351-2359.

    Google Scholar 

  7. Holemes PA: Applications of PHB: a microbially produced biodegradable thermoplastic. Phys Technol 1985, 16: 32-36. 10.1088/0305-4624/16/1/305

    Article  Google Scholar 

  8. Huang R, Reusch RN: Poly(3- hydroxybutyrate) is associated with specific proteins in the cytoplasm and membranes of Escherichia coli . J Biol Chem 1996, 371: 22196-22202.

    Google Scholar 

  9. Jiang YJ, Song X, Gong L, Li P, Dai CC, Shao WL: High poly (β-hydroxybutyrate) production by Pseudomonas fluorescens A2a5 from in expensive substrates. Enzyme Microb Technol 2008, 42: 167-172. 10.1016/j.enzmictec.2007.09.003

    Article  Google Scholar 

  10. Kimura H, Yoshida Y, Doi Y: Production of poly(3- hydroxybutyrate-co-4-hydroxybutyrate) by Pseudomonas acidovorans . Biotechnol Lett 1992, 14: 445-450. 10.1007/BF01023164

    Article  Google Scholar 

  11. Kumar S, Tamura K, Nei M: MEGA3: integrated software for molecular evolutionary genetics analysis and sequence alignment. Brief Bioinform 2004, 5: 150-163. 10.1093/bib/5.2.150

    Article  Google Scholar 

  12. Lane DJ: 16S/23S rRNA sequencing. In Nucleic acid techniques in bacterial systematics. Edited by: Stackebrandt E, Goodfellow M. Chichester: Wiley; 1991:115-175.

    Google Scholar 

  13. Lee SY, Choi JI: Polyhydroxyalkanoates: biodegradeable polymer. In Manual of indusrial microbiology and biotechnology. 2nd edition. Edited by: Demain AL, Davies JE, Atlas RM, Cohen G, Hershberger CL, Hu WS, Sherman DH, Willson RC, David JH. Washington: American Society of Microbiology; 2004:pp 616-pp 624.

    Google Scholar 

  14. Linko S, Vaheri H, Seppala J: Production of poly-β-hydroxybutyrate on lactic acid by Alcaligenes eutropgus H16 in a 31 bioreactor. Enzyme Microb Technol 1993, 15: 401-406. 10.1016/0141-0229(93)90126-M

    Article  Google Scholar 

  15. Liu QJ: Structure and dynamics of the subalpine coniferous forest on Changbai mountain, China. Plant Ecol 1997, 132: 97-105. 10.1023/A:1009705319128

    Article  Google Scholar 

  16. Lopez NI, Pettinari MJ, Stackebrandt E, Tribelli PM, Potter M, Steinbuchel A, Mendez BS: Pesudomonas extremaustralis sp nov, a poly(3-hydroxybutyrate) producer isolated from an Antarctic environment. Curr Microbiol 2009, 59: 514-519. 10.1007/s00284-009-9469-9

    Article  Google Scholar 

  17. Magee CM, Rodeheaver G, Edgerton MT, Edlich RF: A more reliable Gram staining technique for diagnosis of surgical infections. Am J Surg 1975, 130: 341-346. 10.1016/0002-9610(75)90398-0

    Article  Google Scholar 

  18. Moyer C, Morita R: Psychrophiles and psychrotrophs. Encyclopedia of Life Science 2007. 10.1002/9780470015902.a0000402.pub2

    Google Scholar 

  19. Page WJ: Production of poly-β-hydroxybutyrate UWD in media containing sugars and complex nitrogen sources. Appl Microbiol Biotechnol 1992, 38: 117-121.

    Google Scholar 

  20. Spiekermann P, Rehm BHA, Kalscheuer R, Baumeister D, Steinbuchel A: Asensitive, viable-colony staining method using Nile red for direct screening of bacteria that accumulate polyhydroxyalkanoic acids and other lipid storage compounds. Arch Microbiol 1999, 17: 73-80.

    Article  Google Scholar 

  21. Steinbuchel A, Valeniin HE: Diversity of bacterial poly hydroxybutyrate acids. FEMS Microbiol Lett 1995, 128: 219-228.

    Article  Google Scholar 

  22. Steinuchel A, Byrom D: Biomaterials: Novel materials from biological sources. New York: Stockton; 1991:123-213.

    Book  Google Scholar 

  23. Tang L, Luo GY: Study on nitrogen removal characteristics of an aerobic denitrifying bacterium Rhodococcus strain T7. Environ Ecol Three Gorges 2008, 1: 24-27.

    Google Scholar 

  24. Tribelli PM, Iustman LJR, Catone MV, Martino CD, Revale S, Mendez BS, Lopez NI: Genome sequence of the polyhydroxybutyrate producer Pseudomonas extremaustralis , a highly stress-resistant Antarctic bacterium. J Bacteriology. 2012, 194: 2381-2382. 10.1128/JB.00172-12

    Article  Google Scholar 

  25. Verlinden RA, Hill DJ, Kenward MA, Williams CD, Piotrowska-Seget Z, Radecka IK: Production of polyhydroxyalkanoates from waste frying oil by Cupriavidus necator . AMB Express 2011, 1: 11-19. 10.1186/2191-0855-1-11

    Article  Google Scholar 

  26. Yue WJ, Liu C, Zhang XF: Accumulation of poly-β-hydroxybutyrate acid (PHB) by Rhodopseudomonas palustris . Environ Sci Technol 2007, 30: 26-28.

    Google Scholar 

Download references

Acknowledgments

This research was supported by for National Science Foundation of China (No. 51008012) and Open Science Foundation of Jiangsu Key Laboratory for Biomass-based Energy and Enzyme Technology (No. JSBEET1314).

Author information

Authors and Affiliations

  1. Colloge of Biotechnology and Pharmaceutical Engineering, Nanjing University of Technology, Nanjing, 211800, People’s Republic of China

    Rongpeng Li, Jingjing Yang, Yuan Gao, Xiaoli Zi, Xia Zhang, Haofeng Gao & Nan Hu

  2. Institute of Soil Science, Chinese Academy of Sciences, Nanjing, 210008, People’s Republic of China

    Yuji Jiang

  3. Jiangsu Key Laboratory for Biomass-based Energy and Enzyme Technology, Huaian, 223300, People’s Republic of China

    Xinfeng Wang

Authors
  1. Rongpeng Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Yuji Jiang
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Xinfeng Wang
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jingjing Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Yuan Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Xiaoli Zi
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Xia Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Haofeng Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Nan Hu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Nan Hu.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

LRP, JYJ and HN carried out the strains isolation, characteristics, PHB extraction and identification, and drafted the manuscript. WXF carried out the Biolog Gram-negative assay. YJJ carried out the 16S rRNA gene amplication. GY and ZXL carried out researches on effect of culture conditions on cell growth. ZX and GHF participated in the cell cultivations and 16S rRNA sequence alignment. All authors read and approved the final manuscript.

Authors’ original submitted files for images

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

Li, R., Jiang, Y., Wang, X. et al. Psychrotrophic Pseudomonas mandelii CBS-1 produces high levels of poly-β-hydroxybutyrate. SpringerPlus 2, 335 (2013). https://doi.org/10.1186/2193-1801-2-335

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/2193-1801-2-335

Keywords